Download Instruction Manual

Step 1
Layout Foundation
Tools Needed:
Materials Needed:
4x K3 Post Mount Bracket
4x B5 Anchor Bolts
Fig. 1
11’8-7/8”
1. Layout the footprint of the Fresco.
11’8-7/8”
16’8-1/8”
2. From center to center on each side, the anchor
bolt locations are 11’-8 7/8” apart and 16’-8 1/8”
along the diagonal. (Fig.1).
3. For reference, the outside to outside dimensions
of the brackets are 12’-2 3/8”. Measuring diagonal
from outside to outside dimension should be 17’-3”
(Fig. 3).
Fig. 2
4. The diagonal of the Inside of bracket dimension
should be 15’-11 7/16”.
5. Determine which side of Pergola you would like
the water to drain. This is key to how the assembly
process will start. The two shorter posts are
installed on the drainage side.
Fig. 3
17’-3”
Tip:
If this is your drainage side, start assembly
on the right or left side, not across from it.
See step #4 for start of assembly process.
12’-2-3/8”
Or Start Here
Start Here
Drain Side
12’-2-3/8”
Do not start assembly on drainage side or opposite
Page
7