1
Download ATCA-7367 BBS Programmer`s Reference Guide
Transcript
Clock Agent Command Module 9.2.1 Enable Clock Buffer Description This command enables the clock buffer for the specified clock id. Synopsis clkcmd -e -c <clock> Parameters You can enable the clock buffers for the following clock ids. CLK1A CLK1B CLK2A CLK2B CLK3A CLK3B AMC1_TCLKA AMC1_TCLKC RTM_TCLKA RTM_TCLKC You can not enable CLKxA and CLKxB at the same time, with different frequencies. CLKxA and CLKxB are intended to provide redundancy, in case of a switchover. Hence, CLKxA and CLKxB must use the same frequency. Example To enable the clock buffer related to clock 1A. clkcmd -e -c CLK1A Basic Blade Services Software on ATCA-7367 Programmer’s Reference (6806800K69F) 149
