Download Section 4. Safe Job Procedures

SAFE JOB PROCEDURES
AERIAL PLATFORM
PURPOSE:
To protect the workers and people within the vicinity of the Aerial Work Platform (Scissor Lift,
Sky Reach, Boom Lift, Articulated Lift, Hotel Lift etc…) from injuries associated with the use of
the mentioned equipment.
POLICY:
When working with any Aerial Work Platform (AWP), it is CPP’s policy that the operator has
current certified training from a qualified competent instructor, and adheres to all of CPP’s
procedures on working with AWP’s, to ensure the safety of themselves, as well as the safety of
others.
PROCEDURE:
1. Only Certified, Trained workers will operate any AWP.
2. Operators will display a professional attitude and will demonstrate the respect for
personal safety and the safety of others.
3. Operators will obey all procedures all the time.
4. Operators will demonstrate respect for facilities and property.
5. Before beginning any tasks with the AWP, the operator will make sure that the AWP has
a completed Pre-Shift Inspection form. (See Sec7, Preventative Maintenance Forms, Pre-Shift
Inspection).
The form should indicate that the AWP is in full compliance, and that any
issues have been addressed. The form should be filled out by the operator prior to start
up.
6. The operator should be familiar with the AWP’s Safety and Operating procedures.
7. The AWP is not used to transport materials, manned or un-manned. AWP’s are
designated to transport and raise personnel and tools to overhead work areas.
8. Do not drive the AWP near drop offs, holes or loading docks.
9. Do not raise platform on slope or drive AWP onto slope when elevated.
CDN. Power Pac
CPP- Safe Job Procedures
REVISION:
2012-003
EFFECTIVE DATE:
January, 2012
PAGE 1 OF 3