Download Section 4. Safe Job Procedures
Transcript
SAFE JOB PROCEDURES Voltage Range Minimum Safe Approach Distance Phase to Phase Feet 0 to 300V Avoid Contact Avoid Contact Over 300V to 50kV 10 3.05 Over 50kV to 200 kV 15 4.60 Over 200kV to 350kV 20 6.40 Over 350kV to 500kV 25 7.62 Over 500kV to 750kV 35 10.67 Over 750kV to 1000kV 45 13.72 Meters 27. Ensure the correct safety harness is worn and attached to the AWP when elevated. 28. Site mandatory PPE is still required to be worn while in the AWP. 29. While operating AWP, the operator shall not engage in any other hand held device(s) while operating motion and/or lift controls. Failure to comply with any of these AWP procedures may result in immediate disciplinary actions. Harold Kinsey CDN. Power Pac CPP- Safe Job Procedures January, 2013 REVISION: 2012-003 EFFECTIVE DATE: January, 2012 PAGE 3 OF 3