Download Section 4. Safe Job Procedures

Transcript
SAFE JOB PROCEDURES
•
Before driving away, the driver will conduct a vehicle walk-around looking for any
damage, obstructions; and check his load to ensure it is safe and secure. The driver will
be responsible for the vehicle, passengers, and load.
•
If a driver has to tow any equipment by trailer and is in excess of 4500kg they are
required to fill out a separate vehicle/trailer checklist before departure, as per NSC
Standard Requirements..
•
•
Every company vehicle should contain:
-
A copy of the Company’s Health and Safety Manual.
-
A copy of the NSC Truck, Tractor & Trailer Schedule.
-
A Equipment Vehicle Checklist.
-
A Vehicle Incident Report form.
-
Road Hazard Kit.
-
First Aid Kit (Alberta #2)
-
(1) 5lb Class A fire extinguisher or (2) 2.5lb Class A fire extinguishers.
When refueling a vehicle, no source of ignition is permitted in the immediate vicinity.
Shut engine off, no smoking, no cellular phones in use.
•
Company vehicles will be driven in a safe and courteous manner at all times.
•
No employee shall drive a company vehicle while he/she is under the influence of alcohol
or drugs. Alcohol or drugs are not permitted in company vehicles.
•
Fire Extinguishers will be checked by the driver upon every trip and recharged at a
minimum; yearly, after discharge, or when the gauge is not reading full.
•
The presence of a current pink slip and registration in all vehicles is the responsibility of
the operator.
•
Tire Chalks are required for all vehicles owned, operated, and leased by the company that
are larger than 1 ton.
•
No unauthorized modifications or equipment additions may be made to any company
equipment. Examples: Stereos, command starters, special seats, cosmetic items, bug
deflectors, etc.
CDN. Power Pac
CPP- Safe Job Procedures
REVISION:
2011-002
EFFECTIVE DATE:
March 15, 2011
PAGE 3 OF 5