Download User manual FL SWITCH MM HS UM E for

FL SWITCH MM HS
Description
Here you can disable the port:
Port disabled
Port enabled
1
2
flWorkNetPortLinkMonitoring
OID
1.3.6.1.4.1.4346.11.11.4.2.2.1.8
Syntax
Integer
Access
Read and write
Description
This object can be used to enable link monitoring (message via display and alarm contact)
for the relevant port:
Link monitoring enabled
Link monitoring disabled
2
1
flWorkNetPortModus
OID
1.3.6.1.4.1.4346.11.11.4.2.2.1.9
Syntax
Integer32 (0 - 1024)
Access
Read and write
Description
This object can be used to set the transmission mode for the relevant port:
Auto negotiation
1
10 Mbps half duplex
2
10 Mbps full duplex
3
100 Mbps half duplex
4
100 Mbps full duplex
5
Glass fiber FX ports only support operation at 100 Mbps full duplex (5).
The auto crossing function is only active when auto negotiation is enabled. If the
transmission speed or transmission mode is set to a fixed value, the auto
crossing function is disabled.
flWorkNetPortSTPEnable
OID
1.3.6.1.4.1.4346.11.11.4.2.2.1.10
Syntax
Integer
Access
Read and write
Description
This object controls the handling of BPDUs if (Rapid) Spanning Tree is activated:
Firmware with Rapid Spanning Tree Protocol:
RSTP not activated
1
RSTP activated
2
Firmware with Spanning Tree Protocol:
STP not activated, port is in:
Fast forwarding mode 1
STP activated
2
flWorkNetPortIfIndex
OID
1.3.6.1.4.1.4346.11.11.4.2.2.1.11
Syntax
Integer32 (0 - 1024)
Access
Read
Description
Contains the index of the port according to IEEE 802.3ad.
4-82
PHOENIX CONTACT
6874_en_16