Download User manual FL SWITCH MM HS UM E for

FL SWITCH MM HS
Modifying
assignment
Select the corresponding group in the "Select Group" list box to modify or delete the port
assignment. The group members are indicated by activated checkboxes and can be
modified, if required. An action is completed by entering a password and clicking on "Apply"
or "Delete".
Figure 7-2
Checking group
assignment
"Static Multicast Groups" menu
In order to check which ports are assigned to which group, select one of the existing groups.
The corresponding MAC address is then displayed in the "Multicast Group Address" text
field. The members of the group are indicated by the activated checkboxes.
Multicast addresses
Do not use multicast MAC addresses that are in the range from 01:00:5e:80:00:00 to
01:00:5e:FF:FF:FF.
Incorrect format
An incorrect MAC address format and the entry of "non-multicast addresses" is indicated
and the entry is not permitted.
Please note that in multicast MAC addresses the bytes are separated by a colon (:) and IP
multicast addresses are separated by a full stop (.).
7.3.3
Procedure for creating a multicast group
Gain an overview of the multicast applications available within the network and the multicast
addresses used. Create a group for every multicast application or for the multicast address
used, and for each switch add the ports to which a device of the appropriate group is directly
connected or via which the device can be accessed.
7-4
PHOENIX CONTACT
6874_en_16