Download User Manual - Philips Lighting

Transcript
SL PAR 155 ZOOM RGBW LED Luminaire
Installation & User’s Manual
Connecting SL PAR 155 ZOOM RGBW LED Luminaires to AC Power
If you did not order an AC input cable accessory with your unit, Table 2 describes how to connect power to your SL
PAR 155 ZOOM RGBW LED Luminaire. Field wiring of the SL PAR 155 ZOOM RGBW LED Luminaire is straight
forward. A total of 3 wires/conductors need to be brought to the unit. The following wiring scheme is required:
Table 2: SL PAR 155 ZOOM RGBW LED Luminaire AC Input Connections
Wire Color
Purpose
Brown
Main / Line (100 to 240VAC)
Blue
Neutral
Green/Yellow
Ground (Earth)
Rear of Unit
AC Input Connector
AC Output (Thru) Connector
Luminaire
AC Input Connector (on Unit)
AC Output Connector (on Unit)
Main /
Line
Neutral
AC Connector
(on side of unit)
Ground / Earth
Main /
Line
Neutral
AC Connector
(on side of unit)
Ground / Earth
Figure 4: SL PAR 155 ZOOM RGBW LED Luminaire AC Input & Output Connections
CAUTION: In the event the AC input cable of this luminaire is damaged, it must be replaced, by the user, with an
approved cable through an Authorized Showline Dealer or Service Center.
Sh wline
Connecting Power
9