Download User Manual - Philips Lighting
Transcript
SL PAR 155 ZOOM RGBW LED Luminaire Installation & User’s Manual Connecting SL PAR 155 ZOOM RGBW LED Luminaires to AC Power If you did not order an AC input cable accessory with your unit, Table 2 describes how to connect power to your SL PAR 155 ZOOM RGBW LED Luminaire. Field wiring of the SL PAR 155 ZOOM RGBW LED Luminaire is straight forward. A total of 3 wires/conductors need to be brought to the unit. The following wiring scheme is required: Table 2: SL PAR 155 ZOOM RGBW LED Luminaire AC Input Connections Wire Color Purpose Brown Main / Line (100 to 240VAC) Blue Neutral Green/Yellow Ground (Earth) Rear of Unit AC Input Connector AC Output (Thru) Connector Luminaire AC Input Connector (on Unit) AC Output Connector (on Unit) Main / Line Neutral AC Connector (on side of unit) Ground / Earth Main / Line Neutral AC Connector (on side of unit) Ground / Earth Figure 4: SL PAR 155 ZOOM RGBW LED Luminaire AC Input & Output Connections CAUTION: In the event the AC input cable of this luminaire is damaged, it must be replaced, by the user, with an approved cable through an Authorized Showline Dealer or Service Center. Sh wline Connecting Power 9