Download NiTek X Dive Computer User Guide

Using the NiTek X
Before going diving, set the computer to the type of water you
are diving in. This allows for the most accurate calculations with
respect to no-decompression limits, etc.
To set for fresh or salt water use:
1. Press button A until “SET” is displayed.
2. Press button B to enter the dive set up option screen.
Mix1 is flashing.
3. Repeatedly press button A until the screen changes and SEA
or FRESH is flashing.
4. Press button B to toggle between fresh or sea water.
5. When finished, press button A to advance to the next option
(Contrast). To exit, press and hold button A for 2 to 3
seconds to return to surface mode.
Setting for Screen Contrast
The NiTek X is capable of changing the degree of image contrast
between the screen characters and the background to aid in
visibility in poor lighting situations.
Before going diving, set the computer to give a contrast ratio that
allows for easiest readability conditions. The default ratio is 5,
and ranges from 0 to 10.
To set for Screen Contrast use:
1. Press button A until “SET” is displayed.
2. Press button B to enter the dive set up option screen.
Mix1 is flashing.
3. Repeatedly press button A until the screen changes and the
contrast number is flashing.
4. Press button B to increasne the contrast ratio.
5. When finished, press button A to advance to the next option
(Backlight). To exit, press and hold button A for 2 to 3
seconds to return to surface mode.
NiTek X Dive Computer User Manual V1.0
25