Download Click for User Manual

User’manual
menu
2.2.19 G40——Cancelation of the cutter radius compensation .................................... 2-13
2.2.20 G41——Left side cutter radius compensation ................................................ 2-13
2.2.21 G42——Right side cutter radius compensation................................................. 2-13
2.2.22 G43——Setup of cutter length compensation.................................................... 2-15
2.2.23 G44——Cancelation of cutter length compensation.......................................... 2-16
2.2.24 G47——Short linear velocity automatic transition............................................ 2-16
2.2.25 G48——Cancel G47 .......................................................................................... 2-16
2.2.26 G54～G59——Workpiece coordinate system selection.................................... 2-16
2.2.27 G73——High speed deep hole processing circulation....................................... 2-17
2.2.28 G74——Return to reference point(machine tool zero point)............................. 2-17
2.2.29 G75——Returns from reference point to cutter entry point .............................. 2-17
2.2.30 G76——Returns from current position to procedure zero point........................ 2-18
2.2.31 G78——Precision boring circulation................................................................. 2-18
2.2.32 G81——Central hole bore drill circulation........................................................ 2-18
2.2.33 G82——Central hole bore drill circulation with pause...................................... 2-19
2.2.34 G83——Deep hole processing circulation......................................................... 2-19
2.2.35 G84——Metric size rigid threading circulation................................................. 2-19
2.2.36 G85——Inch size rigid threading circulation .................................................... 2-20
2.2.37 G86——Hole boring circulation(automatic return) ........................................... 2-20
2.2.38 G87——Counter boring circulation................................................................... 2-21
2.2.39 G88——Hole boring circulation(manual return) ............................................... 2-21
2.2.40 G89——Hole boring circulation with pause...................................................... 2-22
2.2.41 G90——Programming based on absolute value ................................................ 2-22
2.2.42 G91——Programming based on increment ....................................................... 2-22
2.2.43 G92——Setup workpiece coordinate system..................................................... 2-23
2.3 Auxiliary functions(M function) .................................................................................. 2-23
2.3.1 M00——Procedure suspension............................................................................ 2-24
2.3.2 M01——Condition suspension ............................................................................ 2-24
2.3.3 M02——Procedure end ....................................................................................... 2-24
2.3.4 M03——Main axle clockwise revolution ............................................................ 2-24
2.3.5 M04——Main axle counterclockwise revolution ................................................ 2-24
2.3.6 M05——Main axle stop....................................................................................... 2-25
2.3.7 M08——Turn on cooling system......................................................................... 2-26
2.3.8 M09——Turn off cooling system ........................................................................ 2-26
2.3.9 M10——Hold on work piece............................................................................... 2-26
2.3.10 M11——Release work piece ............................................................................. 2-26
2.3.11 Output M function control.................................................................................. 2-26
2.3.12 Four speed motor control ................................................................................ 2-26
2.3.13 M20——Operate assigned relay ........................................................................ 2-26
2.3.14 M21——Pass assigned relay.............................................................................. 2-26
2.3.15 M30——Return to procedure head .................................................................... 2-27
2.3.16 M(41－44).......................................................................................................... 2-27
2.3.17 M71～M85——M function pulse output .......................................................... 2-27
2.4 F、S、T function .......................................................................................................... 2-27
II