Download MRX Microplate Reader User Manual

Symbols
Symbols
Warning Symbol
For your safety the Reader is marked with a warning symbol to remind
you of certain hazards:
!
• On the back panel: this indicates that the optics door may be hot. If
you want to remove the optics door, make sure that you allow the
Reader to cool before touching it.
• Adjacent to the mains outlet: this indicates that the outlet should only
be used for an external monitor with a power rating of up to 120VA
and an earth leakage current of less than 1 mA at 264V and 60 Hz.
Plate Carrier Diagram
The diagram on the inside of the floppy disk drive door shows the
mechanism for moving the plate carrier in and out.
Figure 1 Plate Carrier Diagram
While the Main menu is displayed, the plate carrier can be moved in and
out using the up and down (∧ ∨) cursor keys. The up key moves the plate
carrier in, and the down key moves it out.
Do not place any objects, or stand within 150mm (6.5 in) of the front of
the Reader as this will obstruct the plate carrier.
MRX Microplate Reader User Manual
5