Download 1-0 Installing Aker Firewall

Transcript
The solution to this problIn is to update all versions before 3.10 to 3.10 or superior
(which are totally compatible)
SNMP
I realized that when I administrate Aker Firewall running on Linux Platform, the
SNMP read and write communities, in the configuration parameters window, are
disabled. What does it happen ?
The Linux operating systIn already comes with a pre-installed SNMP agent. Because of
that, we chose not to install Aker Firewall SNMP agent.
To learn how to set up Linux SNMP agente read and write communities, please refer to
its documentation.
Other services
How to configure MS Exchange servers to operate through Aker Firewall ?
To allow the correct operation of Exchange Servers through firewalls it is necessary to
force the use of specific ports that will be used by those servers. In order to do that, it is
necessary to include the following keys in the registry of the servers (all keys are casesensitive):
In
HKLM\SYSTIn\CurrentControlSet\Services\MSExchangInTA\Parame
ters
Add DWORD TCP/IP port for RPC listens with the port to be used (for example,
30001).
In
HKLM\SYSTIn\CurrentControlSet\Services\MSExchangeSA\Paramet
ers
Add DWORD TCP/IP port with the port to be used (for example, 30002).
In
HKLM\SYSTIn\CurrentControlSet\Services\MSExchangeDS\Paramet
ers
Add DWORD TCP/IP port with the port to be used (for example, 30003).
In
HKLM\SYSTIn\CurrentControlSet\Services\MSExchangeIS\Paramet
ersystIn
Add DWORD TCP/IP port with the port to be used (for example, 30004).
Obs1: After the modifications above it is necessary to restart the Exchange servers.
Obs2: In case the Exchange version is 5.5, it is necessary to apply Service Pack 2 or
superior so this can work
Aker Firewall Configuration for the above example:
438