Download FrameSaver SLV, Models 9126, 9128, and 9128

Configuration
When the . . .
The following prompt
appears . . .
If you select . . .
H Response to the
—
H No – No previously configured
DLCIs, ISDN Link Profiles, or
PVC Connections are
removed or changed, but
updates due to LMI responses
will be performed using the
new setting.
Remove Alternate
Destinations
from PVCs and
delete unused
DLCI Records?
prompt was Yes, and
H Automatic Backup
H Yes – All Alternate Destination
Configuration was
disabled
information will be removed
from PVC Connections and
Management PVCs, and all
DLCIs and ISDN Link Profiles
(except for the first one) used
exclusively as Alternate
Destinations are deleted.
H Response to the
Remove Alternate
Destinations
from PVCs and
delete unused
DLCI Records?
prompt was Yes, and
Add Alternate
Destinations
to Current
PVC Connections?
H Automatic Backup
Configuration was set
to Single_Site_Backup
or Multi_Site_Backup
H No – No previously configured
PVC Connections are
removed or changed, but
updates due to LMI responses
will be performed using the
new setting.
H Yes – Alternate Destination
information is configured for
current DLCIs, ISDN Link
Profiles, PVC Connections
and Management PVCs on
the ISDN DBM interface,
except for the Management
PVC designated as the TS
Access Management Link.
NOTE:
When DLCIs, PVC connections, and management PVCs for the first ISDN
Link Profile have been configured manually, it is recommended that specific
discovered DLCIs, PVC connections, and management PVCs be deleted
manually via the Configuration menus. Otherwise, the manual configurations
will be deleted along with the automatically configured ones.
To specify when automatic backup is allowed or can occur, see Setting the
Criteria for Automatic Backup.
9128-A2-GB20-40
November 2000
3-19