Download Installation, maintenance and user manual
Transcript
Dealing with malfunctions 50 Draining, heat medium side Close the shut-off valves in heating medium system. And then close the water tank drain valve (79) . and open the drain valve ( 80 ). A small amount of water runs out, however, to fully empty the heating medium side requires the connector that joins the heating medium side and the connection on the heat pump VB-flow to be loosened a little to allow air to enter so the remaining water can run out. When the heating medium is empty the requisite service can be carried out. Draining, water tank First,close the drain valve ( 80 ). And then open the drain valve ( 79 ). When the water tank is empty the requisite service can be carried out. 80 79 53 Draining, the chassis The drain-pipe for the chassis is already assembled in advance before leaving the factory. The consumer is required to place the hose at appropriate location. 82 If the operating disturbance cannot be rectified by means of the above, an installation engineer should be called. 81