Download - Shopatron

11.4 - "Setup"
11.4.1 - User input/output channel assignment panel
(See diagram 11.20)
User defined channel assignment gives users the ability
to customize all input and output channel names.
Included in this panel is unique designation controls
allowing users to define the operation of each channel for
combined use of exterior control sources etc.
(See Section 10.1 for detailed instructions)
Diagram 11.20
11.4.2 - Remote turn on output program panel
(See diagram 11.21)
Remote output setup allows users to customize and self
define the timing of the remote turn on output needed
for the individual vehicle installation. Adjustments
include remote out turn on from .01 - 10.0 seconds and
remote out turn off from .01 - 10.0 seconds.
(See Section 10.2 for detailed instructions)
Diagram 11.21
11.4.3 - Password definitions, setup and system panel
(See diagram 11.22)
The PS8 and its user defined settings files are protected
by a digitally embedded user defined password protocol.
Every PS8 comes with a default password of "
". (All
Spaces) Changing the password prevents unauthorized
access and/or retrieval of the setting files that are currently
on the PS8's DSP preventing them from being modified,
changed or altered.
(See Section 10.4 for detailed instructions)
(Note: The factory default password is all empty spaces (No
characters entered). If you do not have the assigned password you
will not be able to retrieve and sync your PC to the current settings
on the PS8 and should take it back to the dealer who established
the password on your system. You may also restore the system
back to its default settings and start a new customized tune
yourself.)
Diagram 11.22