1
Download "user manual"
Transcript
APPENDICES Number Name Set by (When Set) Meaning Explanation Comment drive number This register stores the drive number of the comment selected by the parameter or the QCDSET instruction. Corresponding ACPU D9 SD650 Comment drive SD651 This register stores the file name of the comment selected by the parameter or the QCDSET instruction in ASCII code (with an extension). SD652 SD653 SD654 SD655 Comment file name SD651 SD652 SD653 SD654 Comment file name SD655 SD656 SD656 Boot designation file drive number SD660 SD661 SD662 SD663 SD664 SD665 Corresponding CPU b15 b8 to 2nd character 4th character 6th character 8th character 1st character of the extension 3rd character of the extension b7 b0 to 1st character 3rd character 5th character 7th character Qn(H) QnPH QnPRH QnU LCPU S (Status change) 2EH(.) 2nd character of the extension This register stores the number of a drive where the boot designation file (*.QBT) has been stored. This register stores the name of a boot designation file (*.QBT) in ASCII code (with an extension). Boot operation designation file b15 b8 to 2nd character 4th character 6th character 8th character 1st character of SD665 the extension 3rd character of SD666 the extension SD661 SD662 SD663 SD664 File name of boot designation file SD666 b7 b0 to 1st character 3rd character 5th character 7th character New Qn(H) QnPH QnPRH QnU*2 LCPU A 2EH(.) 2nd character of the extension This register stores the number of a drive where valid SD670 Parameter enable drive information Parameter enable drive No. parameters have been stored.*1 • 0: Drive 0 (program memory) • 1: Drive 1 (SRAM card) • 2: Drive 2 (Flash card/ATA card) • 4: Drive 4 (standard ROM) *1 QnU For the Q00UJCPU, Q00UCPU, and Q01UCPU, only drives 0 and 4 are parameter-valid drives. This register stores the number of a drive where valid parameters have been stored. • 0: Drive 0 (program memory) • 2: Drive 2 (SD memory card) • 4: Drive 4 (standard ROM) LCPU 329 Appendix 3 Special Register List S (Initial)
