Download 8510 AC Spindle Drive System

Transcript
Chapter 11
Troubleshooting
Figure 11.6
IGBT Module Test Procedure for 8510SA-A11 and A22 Drives
Step 1
–
+
Step 2
Negative (–) Meter Lead
+
Place Positive Meter Lead
(+) on this Screw
Place Positive Meter Lead
(+) on this Screw
–
Negative (–) Meter Lead
Reading > 1 Meg Ohm
Reading = 535mV
Step 3
+
–
Reading > 1 Meg Ohm
Step 4
Place Positive Meter Lead
(+) on this Screw
–
Negative (–) Meter Lead
+
Negative (–) Meter Lead
Place Positive Meter Lead
(+) on this Screw
Reading = 535mV
11-139