Download Autosoft 3000 User Manual

Peekel Instruments
Manual Autosoft 3000 v1.5
card easier than using the CAN interface. Follow these steps to make the replacement:
1. Close Autosoft 3000 and make a backup of the configuration file.
2. Switch off the device, and replace the card.
3. Switch the device back on and load the configuration. Now go to the device properties (see
window above), and select the card that you replaced. It should show a red smiley to indicate
that the new card does not match with the current configuration.
Press the 'Replace Card' button. The software should the new card in the slot and transfer the settings
of the old card to the new one.
Page 95 of 115