Download Colima

5.0
FUEL BED LAYOUT (continued)
7. Take three further small logs and
position at the front of the log support as shown, resting partly on the
log support, and partly on the
metal edge of the burner.
8. Finally, take the two remaining
large logs, and lay directly on top
of the log support as shown.
Once again the exact position of
these logs may be as desired, in
order to achieve a natural, realistic
looking effect.
Some slight adjustment may be
required when the fire is running
to achieve the optimum flame
effect.
6.0
FUEL BED LAYOUT (Glass/pebble models)
Important : Wear protective gloves
when handling the glass crystals.
1. Fill the burner with glass crystals
as shown. The crystals should be
spread evenly and level up to the
same level as the edge of the burner.
5