Download - NavCom Technology Inc.

LAND-PAK™ User Guide – Rev. C
3ASd and 3ASd 869 Radio Modem Battery
A 9.6V 2Ah NiMh battery powers both the 3ASd and
the 3ASd 869 radio modems. The battery is attached
to a cradle on the back of the radios. The battery
charger is the same for both types of radio modem.
The LAND-PAK LM configuration includes one
battery charger1 for the 3ASd radio modem (rover).
The LAND-PAK 869 configuration includes two
battery chargers1, one for each 3ASd 869 radio
modem (base and rover).
There is no charging indicator on the battery charger.
The top of the battery has an on/off switch and a red
LED. The illuminated red LED indicates power on and
battery charging.
Charge the batteries only with the
supplied battery charger; otherwise,
damage to the battery could occur.
„ Battery LED
Table 9: Rover Radio Modem Battery LED
LED
Status
Battery Charging/Radio Modem Power On
„ Battery Charging
Refer to Figure 9, item 4 for battery charger photo.
1. Connect the serial 9-pin end of the battery
charger to the female connector on the bottom of
the radio.
2. Plug the opposite end of the battery charger into
an AC receptacle.
1
Battery Charger Option:
110V (P/N 59-800001-0001) or 220V (P/N 59-800001-0002)
4-51