1
Download ETP1010 Data Sheet PDF
Transcript
Note: Using our Model EMC02 UTP to Fiber media converters on one or both of the channels, allows a large increase in the segment length, by allowing twisted pair cabling to link with a Fiber segment. Our media converters also have the advantage that they do not add a logical repeater count, and they are specially cased to enable wall mounting. Technical Specifications - ETP1010 ETP1010 Ethernet* v 2.0 AUI: One Male DB15 Interface UTP: 2x RJ45 LEDs AUI: Four Squelch, Transmit, Collision & Power Receive, Polarity, Link, Jabber & Enable (5 LEDs each channel) UTP: (Channel A & B) Switches AUI Port:(4 Position DIP) A & B Channels (4 Position DIP) Weight 1) A or B Primary channel Selection 2) SQE / HBE 3) 2.5 or 10 second selection 1) & 3) Reduced Squelch 2) & 4) Link Enable 13 oz. Dimensions 6.9" (175mm) x 2.8" (71mm) x 0.8" (20mm) Environmental Operating Temperature Operating Temperature: +5 to +55 C EMI & Safety FCC Class A, CE Ordering Information ETP1010 Fault Tolerant 10BaseT Transceiver Ordering Hotline & Technical Support - Tel: +1 (510) 440- 0242 [email protected]
