Download triad 2310 digital locating systems
Transcript
(a) To pinpoint the location of the sonde center the cylinder icon that represents the sonde under the crosshair on the screen The user will notice that as the cylinder is centered the centering circle will constrict The tighter this centering circle the more positive the location of the sonde (see next step) The user will also notice that the receiver will report the depth and depth accuracy in the upper right corner of the screen (d) There is one condition that the user should be aware of when centering the sonde in the constricting circle If the icon is a flat rectangle (or nearly so) the user should swing the pointer along the line that cuts through the middle of the icon Move the pointer along this line searching for the maximum ANR and/or the minimum depth report When the receiver is so positioned it will be pointing directly at the sonde (e) When reading the depth hold the receiver steady After a few moments the depth report will stabilize to the most accurate reading For more information about other methods that can be used when attempting to locate a sonde please consult Appendix A “Advanced Locating Techniques”