Download Programming and Operating Manual (Milling)
Transcript
1.2 Machine control panels 1.2.1 Overview Elements on the MCP (Machine Control Panel) front The SINUMERIK 808D MCP is available in the following variants: ● Horizontal MCP variant ● Vertical MCP variant with a reserved slot for the handwheel ● Vertical MCP variant with an override switch for the spindle Horizontal MCP Vertical MCP with reserved handwheel slot 10 Vertical MCP with spindle override switch Programming and Operating Manual (Milling) 6FC5398-4DP10-0BA1, 01/2014