Download Instruction Manual

Transcript
Stainless Steel Protective Guard
The RDO optical dissolved oxygen sensor can be used with the
stainless steel protective guard, Cat. No. 087002. The guard
protects the RDO sensor from damage and adds weight to the
sensor for low depth measuring applications.
Installation of the Protective Guard
1.
Unscrew and remove the thread ring from the RDO sensor.
See Figure 5.
Figure 5 – Thread Ring
2. Slide the protective guard over the front of the RDO sensor
and screw the guard onto the sensor. See Figure 6.
Figure 6 – RDO Sensor with Protective Guard
Thread Cap
Temperature Sensor
O-rings
Spring Contacts
RDO® Optical
Oxygen Sensor User Guide
OpticalDissolved
Window
RDO Cap