Download PDF - Classic Industries

Remanufactured Engines
ATK Remanufactured Engine Warranty Information:
At Classic Industries®, we know that supplying a great product is only part
of the job. The staff at ATK is made up of dedicated professionals whose
only job is to support you, the Classic Industries® customer. From the
moment you call on ATK, whether to request technical assistance, or
inquire about their warranty, they are dedicated to providing solutions
and support. That’s the ATK promise. Classic Industries® and ATK
have always been leaders in innovation, offering products, warranties
and programs that have redefined the industry. That leadership is
evident in our products and our support. ATK warrants to the original
purchaser that each engine sold by Classic Industries® shall be free of
defects in material and workmanship under normal use and with periodical
maintenance as set forth by the original manufacturer subject to the following terms and conditions.
Definitions:
Engine: As used in this warranty refers to the remanufactured assembly (basic block, cylinder head and internal components)
as supplied by ATK.
Term: Standard Warranty: This warranty shall exist for 3 years and Unlimited miles. Warranty term begins on date of installation.
The Standard Warranty applies to all ATK products with the following exceptions:
Diesel Engines carry a warranty term of 12 months or 12,000 miles whichever occurs first.
Trucks Over 11,000 GVW (Gross Vehicle Weight) carry a warranty term of 12 months or 12,000 miles whichever occurs first.
Motorhomes: Class A or Motorhomes over 11,000 GVW are NOT COVERED by the ATK warranty. ATK expressly does not
offer engines for these applications. Please be aware that only engines designed expressly for large motorhomes should ever be
used in such an application. ATK does not catalog nor prepare engines for these applications and therefore takes no responsibility
when an ATK engine is used in this manner.
Product Replaced Under Warranty:
Product replaced under warranty carries the remainder of the original product’s warranty term.
Standards:
Subject to the limitations listed herein. ATK, at its option, shall repair or replace a product within the warranty term after
determination by ATK that the product is defective. All products are to be returned to ATK for inspection. Products not returned
to ATK will not be warranted. All repairs and/or replacements covered by this warranty must be authorized by ATK. Unauthorized
repairs will not be paid.
Limitations:
This warranty applies to products originally supplied by ATK. This warranty does not apply to or include any of the following:
A. Damage as a result of OVERHEATING, LACK OF LUBRICATION or CONTAMINATION.
B. Damage resulting from PRE-IGNITION or DETONATION. This includes but is not limited to: melted or broken pistons,
broken piston rings, damaged cylinder heads, leaking head gaskets, etc. For more information regarding pre-ignition and detonation
please contact our Customer Service Department.
C. Repair or replacement required as a result of any accident or misuse.
D. Repair or replacement of any accessory or service item, including specifically but not limited to: all components of the cooling,
fuel, electrical and ignition systems in addition to all belts, hoses, and filters.
E. Any product used for competition racing or related purposes.
F. Any product to which a device or accessory not conforming to original manufacturer’s specifications has been installed.
G. Any product on which periodic maintenance services required by the original manufacturer have not been performed.
Limited Liability:
ATK’s liability under this warranty is limited solely to the repair or replacement of defective product. ATK shall not be liable
for any incidental, special, consequential or exemplary damages, including but not limited to rental cars, towing fees or for any
service not expressly provided for herein, relating to or arising from the ATK product.
Limited Warranty:
This warranty is given in lieu of all other warranties, expressed or implied, including any warranty of merchantability, or fitness
for a particular purpose, on the part of ATK or the dealer installing the engine. No dealer nor any agent or employee thereof, is
authorized to extend or modify this warranty.
Labor Payments:
ATK authorized repairs will be compensated at a rate not to exceed 100% of the applicable flat rate schedule as published by
Chilton, Mitchell or Motors Repair Manuals. Hourly rates for all authorized labor claims will be paid in accordance with the
original installation rate, not to exceed $42.00 per flat rate hour. Do-it-yourself repairs, and repairs performed by unlicensed repair
facilities, will be paid at a rate not to exceed $15.00 per flat rate hour.
Additional Owner/User Obligations:
Initial Startup: Valves must be readjusted to manufacturer’s specifications. Due to various component designs, cylinder head
re-torque may or may not be required in your particular application. Refer to factory shop manual for the proper procedure for
your engine type. If for any reason you are unsure what action to take please contact our Customer Service Department via our
Toll Free telephone number.
First Service Between 600-1000 Miles After Installation: Oil and oil filter must be changed, valves readjusted and cylinder
heads re-torqued (refer to initial startup instructions). Failure to perform these basic operations may result in a voided warranty.
ATK Gold Seal Service Agreement is an additional $200.00
Rental Towing Max. Hourly Labor Rate
K
Engines & Components
NO Fault
Gold Warranty Program
YES
YES
Up to $95
Standard ATK Warranty NO
NO
Up to $50
Part # Years C.I.D./L
DC38
DC093
DC088
DCA1
DCA7
DC74
DC89
DC076
DC016
DC078
DC099
VC99
DCC4
DCC7
438
82-84
85-86
85-86
87
88-93
68-72
75-76
75-79
85
86
87-91
87-91
92
92-94
173/2.8
173/2.8
173/2.8
173/2.8
173/2.8
250/4.1
250/4.1
250/4.1
262/4.3
262/4.3
262/4.3
262/4.3
262/4.3
262/4.3
V6
V6
V6
V6
V6
6
6
6
V6
V6
V6
V6
V6
V6
Introducing
ATK’s No Fault Gold Warranty Program.
An added protection program that covers car rental, towing, an increased labor
rate and fluids on all approved claims.
The No Fault Gold Warranty Program Includes:
Rental Car up to $150!
Rental car expense reimbursed for 5 days/ $30 per day up to $150
Towing Up to $100!
Towing reimbursed on approved claims up to $100 per occurrence.
Increased Labor Rate Up to $95 per hour
Increase labor rates to cover approved repairs up to $95 per hour
Fluids Up to $25!
Cost of fluids is reimbursed on approved claims up to $25
ATK now offers the No Fault Gold Warranty Program for you to purchase in
addition to the Industry Leading standard ATK warranty already included with our
remanufactured engines. This added protection policy covers expenses not included
in ATK’s standard warranty. Coverage is based on hourly rates established by
Chilton, Motor and Mitchell manuals.
How
does the core charge work?
Upon ordering, you will be charged the retail price of the engine plus the core charge.
When your engine arrives, you will save the crating that it is shipped in, so that you
can use it to package your core. Once the core is ready to ship, you will call ATK
for core pickup. ATK will then inspect the core to make sure it meets the following
criteria. Providing the core meets all of the criteria, you will be refunded the core price.
Core Policy:
All fluids must be drained prior to core return.
Cores must be complete and in rebuildable condition.
Core returned must be identical to the engine purchased in size and application.
ATK reserves the right to refuse any core that has been modified or altered.
Note: Core prices can fluctuate according to supply, demand and availability. If you plan to
return a core for credit, please confirm the core price with your salesperson prior to ordering.
No further discounts apply.
V.I.N Code
Description
+ Core
B
B
R
R
R
Q
D
D
N
N
Z
Z
Z
W
block #068, 889, 818, carbureted only
block #061, 379, carbureted only
block #061, FI only
block #457, 695, crank #817, FI
block #457, 695, crank #526, 481, FI
no smog, 2 hole starter mount
1 barrel integral head, no smog, head #696, 795, valve cover 6-1/8" wide
no smog, 3 bolt starter, non-integral head, with AC
carbureted or FI, block #177, head #248
carbureted or FI, block #553, head #248
FI, roller cam, block #011, 867, detonation sensor in block, 1988 S-10 4WD must use OE oil pan gasket
w/ tinware. FI, roller cam, block #011, 867, for car or 4WD must change oil pan
FI, roller cam, block #073, 011, 061, 756, head #103, w/o balance shaft, detonation sensor in block, under 8500 GVW
CFI, L35, balance shaft, roller cam, 2 temp/detonation sensors in left head, block #534, 535, 359, head #064, 066,
181, 626, crank #865, screw-in rocker studs, non-adjustable rockers
260
260
260
260
260
310
260
310
260
260
260
260
260
1709.99 ea
1709.99 ea
1709.99 ea
1709.99 ea
1709.99 ea
1944.99 ea
1709.99 ea
1944.99 ea
1604.99 ea
1659.99 ea
1669.99 ea
1774.99 ea
1784.99 ea
260
1784.99 ea
Remanufactured Engines
Price
Toll Free Order Line 800.854.1280