Download Rabbit 3000 Microprocessor User`s Manual
Transcript
In the case of write cycles, the chip select signals are active only around the trailing edge of the write signal. Wait states are inserted between T1 and T2, and this will have no effect on the duration of the chip select signals in this mode. The timing diagrams below illustrate the actual timing for the different divided cases. In these cases the chip selects are active for two clock cycles before and two clock cycles after the trailing edge of the write signal. T1 TWA T2 CLK1 CLK A[23:0] valid D[7:0] /CSx /OEx Divide by 8 Mode Figure B-12. Short Chip Select Timing: perclk/8, Write Operation T1 TWA T2 CLK1 CLK A[23:0] valid D[7:0] /CSx /OEx Divide by 6 Mode Figure B-13. Short Chip Select Timing: perclk/6, Write Operation Appendix B Rabbit 3000 Revisions 297