Download Rabbit 3000 Microprocessor User`s Manual

Transcript
In the case of write cycles, the chip select signals are active only around the trailing edge
of the write signal. Wait states are inserted between T1 and T2, and this will have no effect
on the duration of the chip select signals in this mode. The timing diagrams below illustrate the actual timing for the different divided cases. In these cases the chip selects are
active for two clock cycles before and two clock cycles after the trailing edge of the write
signal.
T1
TWA
T2
CLK1
CLK
A[23:0]
valid
D[7:0]
/CSx
/OEx
Divide by 8 Mode
Figure B-12. Short Chip Select Timing: perclk/8, Write Operation
T1
TWA
T2
CLK1
CLK
A[23:0]
valid
D[7:0]
/CSx
/OEx
Divide by 6 Mode
Figure B-13. Short Chip Select Timing: perclk/6, Write Operation
Appendix B Rabbit 3000 Revisions
297