1
Download Avid Advanced Guide for Media Composer and Symphony
Transcript
Using the Audio EQ Tool The horizontal center line of the graph is 0 (zero). As you move the curve below the zero line, the corresponding frequencies are deemphasized. Above the zero line, the corresponding frequencies are emphasized. The parametric midrange allows a smooth transition from deemphasized frequencies to emphasized frequencies. The IN button allows you to turn off an individual EQ effect (the currently selected effect). The button is yellow when the EQ effect is on (inline) and gray when the EQ effect is off. The Ignore EQ option turns off all EQ effects for the sequence. Rendered EQ effects still play correctly. When you apply Audio EQ effects, consider the following: • Apply Audio EQ to entire segments only. You cannot isolate portions of a segment for an Audio EQ effect by using IN to OUT points. You must use add edits (match frames) to mark off a smaller segment. • Use IN to OUT points to select a range of complete segments for applying an Audio EQ effect. Segments that fall within the marks, either in part or whole, have the effect applied to them. The following illustration shows the Audio EQ tool with the frequency response curve displayed and identifies the related areas of the tool. 415
