Download 5Categories and Use of Basic Application Instructions

6
Motion Instructions and G-Code Instructions
MON
Mnemonic
Operands
Function
16
CANC
N/A
Cancel Compensation
Explanations:
1. You can place an M-Code instruction after CANC.
2. When CANC instruction is executed, all motion compensations will be cancelled, i.e. special registers D1708 ~
D1709, D1724 ~ D1725, D1710 ~ D1711, D1726 ~ D1727, and D1712 ~ D1713 will all be cleared automatically.
Remarks:
D1708
Compensation value of X-axis moving distance (low word)
D1709
Compensation value of X-axis moving distance (high word)
D1724
Compensation value of Y-axis moving distance (low word)
D1725
Compensation value of Y-axis moving distance (high word)
D1710
Compensation value of X-axis center (low word)
D1711
Compensation value of X-axis center (high word)
D1726
Compensation value of Y-axis center (low word)
D1727
Compensation value of Y-axis center (high word)
D1712
Compensation radius of X-axis arc (low word)
D1713
Compensation radius of X-axis arc (high word)
DVP-PM Application Manual
6-27