Download User`s Manual

&Pn
&P0
&P1
&Q0
&Sn
&S0
&S1
&Tn
&T0
&T1
&T3
&T4
&T5
&T6
&T7
&T8
&Un
&U0
&U1
&Vn
&V0
&V1
&V3
&Wn
&W0
&W1
&Yn
&Y0
&Y1
&Zn=x
%En
%E0
%E1
%E2
%Gn
%G0
%G1
-Cn
-C0
-C1
dial pulse ratio (Default=0)
Sets 10-pps pules dial with 39% / 61% make-break
Sets 10-pps pules dial with 33 / 67 make-break
Communication mode option-modem supports only async
mode (Default=0)
DSR (data set ready) option (Default=0)
DSR is always active
DSR active only during handshaking and when carrier is lost
Self test commands (Default=0)
Terminate test in progress
Initiate Local Analog Loopback
Initiate Local Digital Loopback
Grants RDL request from remote modem
Denies RDL request from remote modem
Initiates remote digital Loopback
Starts remote digital Loopback with self-test
Initiate Local Analog Loopback with self test.
Disable Trellis coding (Default=0)
Enables Trellis coding with QAM as fallback
QAM modulation only
View active and stored profiles (Default=0)
View stored profile 0
View stored profile 1
View relay and general-purpose input-output status
Store active profile (Default=0)
Store in user profile 0
Store in user profile 1
Select stored profile on power up (Default=0)
Recall stored profile 0 on power-up
Recall stored profile 1 on power-up
Store Telephone Numbers
n=0 to 3 and x=dial string.
Auto-retrain control (V.22 bis and V.32 bis only) (Default=1)
Disables auto-retrain
Enables auto-retrain
enables line quality monitor and fallback/fall forward
Rate renegotiation (Default=0)
Disabled
Enabled
Generate data modem calling tone (Default=1)
Calling tone disabled
1300-Hz calling tone enabled
79