Download AN001 AC source assistance (Smart-Boost function)

001
RCC -02 / -03 programming guide
1. User level to EXPERT
Press SET and search with
3. Maximum source AC current
(power sharing)
:
Press SET and search with
:
User level {5012}
Basic settings {1100}
Press SET and insert the code i :
Press SET and search with
42 64 68
:
Max source AC
current (Power
Sharing) {1107}
Press SET :
Press SET, adjust the desired
and press SET :
value i with
Your level is
EXPERT
Your input current is
adjusted
i
The code is available in the
user manual RCC -02 / -03
i
4. Prohibit to go over AC input
current without opening the
transfert relay
2. Smart-Boost allowed
Press SET and search with
:
Basic settings {1100}
Press SET and search with
Press SET and search with
:
:
Basic settings {1100}
Lockings {1123}
Press SET and search with
The current value [Aac] must be
set according to the size of the
circuit breaker or the grid
capacity
:
Press SET and search with
Smart-Boost allowed
{1126}
:
Combi Inverter –
Charger {1197}
Press SET, selection Yes
with
and press SET :
Press SET and search with
The Smart-Boost is
allowed
Allow to go over AC
input current without
opening the transfert
relay {1436}
Press SET, selection No
with
and press SET :
The function is
prohibited
Page 3 / 4
: