Download User Manual LPM15 Liquid-Cooled Adjustable Frequency AC Drive

3-6
Programming and Parameters
No.
Group
File
Monitor File
001
002
Parameter Name & Description
See page 3-2 for symbol descriptions
[Output Freq]
Default:
Read Only
Min/Max:
Units:
Default:
–/+[Maximum Freq]
0.1 Hz
Read Only
Min/Max:
Units:
Default:
–/+[Maximum Speed]
0.1 Hz
Read Only
[Torque Current]
Min/Max:
Units:
Default:
0.0/Drive Rated Amps × 2
0.1 Amps
Read Only
Based on the motor, the amount of current that is in phase with the
fundamental voltage component.
Min/Max:
Units:
Drive Rating × –2/+2
0.1 Amps
[Flux Current]
Default:
Read Only
Amount of current that is out of phase with the fundamental voltage
component.
Min/Max:
Units:
Drive Rating × –2/+2
0.1 Amps
[Output Voltage]
Default:
Read Only
Output voltage present at terminals T1, T2 & T3 (U, V & W).
Min/Max:
Units:
Default:
0.0/Drive Rated Volts
0.1 VAC
Read Only
Min/Max:
Units:
Default:
0.0/Drive Rated kW × 2
0.1 kW
Read Only
Min/Max:
Units:
Default:
0.00/1.00
0.01
Read Only
Min/Max:
Units:
Default:
0.0/214748364.0 MWh
0.1 MWh
Read Only
Min/Max:
Units:
Default:
0.0/429496729.5 Hrs
0.1 Hrs
Read Only
Min/Max:
Units:
Default:
–/+[Maximum Freq]
0.1 Hz
Read Only
Min/Max:
Units:
Default:
0.0/Based on Drive Rating
0.1 VDC
Read Only
Min/Max:
Units:
Default:
0.0/Based on Drive Rating
0.1 VDC
Read Only
Min/Max:
[Commanded Freq]
[Output Current]
The total output current present at T1, T2 & T3 (U, V & W).
004
005
006
007
[Output Power]
Metering
Output power present at T1, T2 & T3 (U, V & W).
008
32
MONITOR
[Output Powr Fctr]
Output power factor.
009
010
32
011
[Elapsed MWh]
Accumulated output energy of the drive.
[Elapsed Run Time]
Accumulated time drive is outputting power.
[MOP Frequency]
Value of the signal at MOP (Motor Operated Potentiometer).
012
[DC Bus Voltage]
Present DC bus voltage level.
013
[DC Bus Memory]
6 minute average of DC bus voltage level.
016
017
[Analog In1 Value]
[Analog In2 Value]
[Rated kW]
Default:
0.000/20.000 mA
–/+10.000V
0.001 mA
0.001 Volt
Read Only
Drive power rating.
Min/Max:
Units:
Default:
0.00/3000.00 kW
0.01 kW
Read Only
Min/Max:
Units:
Default:
0.0/6553.5 VAC
0.1 VAC
Read Only
Min/Max:
Units:
Default:
0.0/6553.5 Amps
0.1 Amps
Read Only
Min/Max:
Units:
0.000/256.256
0.001
Value of the signal at the analog inputs.
Units:
026
32
Drive Data
027
[Rated Volts]
The drive input voltage class (208, 240, 400, etc.).
028
[Rated Amps]
The drive rated output current.
029
Related
Output frequency present at T1, T2 & T3 (U, V & W).
Value of the active frequency command.
003
Values
[Control SW Ver]
Main Control Board software version.
196