Download Leaf Shaft User Manual: Tidland
Transcript
MAINTENANCE Using the new fitting design with bulk rubber tube material Removing the hose clamp Tidland recommends the use of a pincer for safe and easy removal of the hose clamp. Standard pincer Spring return pincer Tidland Part No. 778957 Tidland Part No. 778958 1. With the pincer, squeeze the tangs (1) on the hose clamp until you can lift the load retaining hook (2), and then release the pincer. 2. Remove the fittings and use them again with new rubber tube material. (Remember to reinstall the tube stiffener, if needed.) 3. To close the clamp, squeeze the tangs until you can snap the load retaining hook into place. www.maxcessintl.com Tidland Leaf Shaft MI 691995 1 J Page 10