Download rcsvconfigurationguide

Contents
7.1
7.2
8
8.1
8.2
9
The Port Manager in the Standalone Mode
The Device Properties Window in the Standalone Mode
Connecting via the ETHERNET
Connecting the ETHERNET Port directly to a PC (Crossover Cable)
Connecting the ETHERNET Port via a Network Hub (Straight-Through Cable)
Writing a Configuration
44
44
45
45
46
46
Figures
Figure 1: Media Room Components List
Figure 2: Driver Database Notice
Figure 3: Setting a Working Directory
Figure 4: Change Working Directory Window
Figure 5: The Driver Manager Window Prior to Installing the Drivers
Figure 6: Importing a Kramer Driver File
Figure 7: Exporting a Kramer Driver File
Figure 8: The Driver Manager Window
Figure 9: New Serial Command Window
Figure 10: Writing the Serial Commands
Figure 11: New IR Command Window
Figure 12: Connect to IR Capture Device Window
Figure 13: IR Command Area Window
Figure 14: IR Emitter Wiring
Figure 15: The Sony DVD Player in the RC Command Area
Figure 16: The Port Manager Window
Figure 17: The Kramer RC Configuration Main Window
Figure 18: Using the Toggle 1-2-3-4 Behavior
Figure 19: Event Macros Tab
Figure 20: The Scheduling Window
Figure 21: IR, RS-232 and RS-485 Port RC Command Area
Figure 22: LIGHT RC Command Area
Figure 23: Relay Port RC Command Area
Figure 24: Switcher Port RC Command Area
Figure 25: Switcher Port RC Command Area
Figure 26: Button Color Port RC Command Area
Figure 27: Color Selection Window
Figure 28: Ignore Button Port RC Command Area
Figure 29: Selecting a Button to Write a Macro
Figure 30: Creating a New Command
Figure 31: Selecting the Port
Figure 32: Labeling the RC Buttons
Figure 33: Typing the Label
Figure 34: Switch to COMP1 Command
Figure 35: LIGHT Command
Figure 36: Lights ON RC Command
Figure 37: Switcher RC Command
Figure 38: High Volume RC Command
ii
5
7
7
8
10
10
11
12
14
15
16
16
17
17
18
19
20
22
22
23
23
24
24
25
25
25
26
26
27
28
28
29
29
30
31
31
32
33
KRAMER: SIMPLE CREATIVE TECHNOLOGY