Download Premium and Atrium using Unity Pro
Transcript
TSX SCA 64 6.1 General Introduction General Introduction General Points The TSX SCA 64 unit is a cabling accessory, which allows a 2 or 4 wire mode communication module to be connected to a Modbus, Jbus or Jnet. In 2-Wire Mode In this mode, connectable communication interfaces are: l The built-in channel of the TSX SCY 11601/21601 modules, via a TSX CM 6530 cable, l The TSX SCP/JNP 114 PCMCIA card, via a TSX SCP CM 6530 cable. Note: Connection can be made to either the JM or the JS connector, regardless of channel configuration (master or slave). Illustration This diagram shows the general principal for connecting in 2-wire mode for a TSX SCY 21601. or Bus •• or 1 = JM connector 2 = JS connector 142 Bus Bus
Related documents
User Manual - LUCKINSlive
Revelation Software Technologies
TSX Micro PLC`s
DPi/DPiS/DPiTH 8,8C,8D,16
Industrial MicroServer EIS-2B
Mase MW 170 HB-RE Specifications
User Manual - LUCKINSlive
Sartorius Serial Profibus Interface YSPI3
Premium PLCs - LUCKINSlive
Premium and Atrium using Unity Pro
Premium and Atrium using Unity Pro
Premium and Atrium using Unity Pro Weighing module User manual