Download Manuals

This communication object is used to disable or enable the Timer function.
Receive telegram "1" - disable the timer function
Receive telegram "0" - enable the timer function
92/../107
1bit value/../4byte value
Time X value(X=1..16)
1bit/../4byte
C, T
When the timer time reaches, this communication object sends the appropriate data values to the bus, the user can
select the appropriate data type and value in the parameter "Reaction at regular time" and the parameter "Output value" as
required for transmission.
Figure 5.5 Timer" communication object table
5.6 "Pushbutton Interface" Communication Object
5.6.1 "Switch" Communication Object
5.6.1 "Switch" Communication Object
Number
Communication object name
Functions
Data Types
Attribute
53/56/59
Switch 1, input 1/2/3
CH A Switch
1bit
C, W,T
When CH A "Switch" is enabled, this communication object is visible, through short push, according to the parameters
settings, performs the corresponding actions, e.g. ON, OFF, TOGGLE, etc. When the telegram is "1"--- ON; When the
telegram is "0"--- OFF.
54/57/60
Switch 2, input 1/2/3
CH A Switch-long
1bit
C, T
When CH A "Switch" is enabled, this communication object is visible, through long push, according to the parameters
settings, performs the corresponding actions, e.g. ON, OFF, TOGGLE, etc. When the telegram is "1"--- ON; When the
telegram is "0"--- OFF.
55/58/61
Disable input 1/2/3
CH A Disable
1bit
C,W
77