Download User Manual
Transcript
12-Channel Electrocardiograph User Manual Entering Patient Information 3) Press Tab or Shift + Tab to move the cursor to ID Mode, and then press the Up or Down arrow to select Manual. 4) Press press , or press Tab or Shift + Tab to move the cursor to the OK button, and then . 5) Press ESC to return to the main interface. 6) Press the function key F1 below Patient to open the Patient Information window. Press Tab or Shift + Tab to move the cursor. When the cursor is in the ID textbox, enter the patient ID manually. , or press Tab or Shift + Tab to move the cursor to the OK button, and then 7) Press press . Note: In the auto, rhythm or off mode, when ID Mode is set to Manual and ID Hint is set to On, if you do not input the patient ID before pressing the START/STOP key, a hint will pop up to remind you to input the patient ID. 6.2 Entering Other Information When the main interface is displayed, press the function key F1 below Patient to open the Patient Information window. - 60 -