Download User Manual

Transcript
12-Channel Electrocardiograph User Manual
Entering Patient Information
3) Press Tab or Shift + Tab to move the cursor to ID Mode, and then press the Up or Down
arrow to select Manual.
4) Press
press
, or press Tab or Shift + Tab to move the cursor to the OK button, and then
.
5) Press ESC to return to the main interface.
6) Press the function key F1 below Patient to open the Patient Information window. Press Tab
or Shift + Tab to move the cursor. When the cursor is in the ID textbox, enter the patient ID
manually.
, or press Tab or Shift + Tab to move the cursor to the OK button, and then
7) Press
press
.
Note: In the auto, rhythm or off mode, when ID Mode is set to Manual and ID Hint is set
to On, if you do not input the patient ID before pressing the START/STOP key, a hint will
pop up to remind you to input the patient ID.
6.2 Entering Other Information
When the main interface is displayed, press the function key F1 below Patient to open the
Patient Information window.
- 60 -