Download Opal-RT + ML60x User Guide.backup.book

Hardware description and setup
4.1
4
ML605 Development boards
ML605 platforms (referred as ‘ML605’ in this guide) are multipurpose evaluation platforms intended to
investigate and experiment programmable device configuration with the feature-rich Virtex-6 FPGA
family from Xilinx. Please refer to Xilinx documentation1 for further details on these boards
architecture. Their many features include:
Virtex-6 FPGA
• XC6VLX240T-1FFG1156 device
Configuration
• Onboard configuration circuitry (USB to JTAG)
• 16 MB Platform Flash XL
• 32 MB Parallel (BPI) Flash
• System ACE™ CompactFlash (CF) controller
Communication and Networking
• 10/100/1000 Tri-Speed Ethernet (GMII, RGMII, SGMII, MII)
• SFP transceiver connector
• GTX port (TX/RX,) with four SMA connectors
• USB to UART Bridge
• USB host port and USB peripheral port
• PCI Express® Gen1 8-lane (x8) and Gen2 4-lane (x4)
Memory
• DDR3 SODIMM (512 MB)
• Linear BPI Flash (32 MB) (Also available for configuration)
• IIC EEPROM (8 Kb)
Clocking
• 200 MHz oscillator (differential)
• 66 MHz socketed oscillator (single-ended)
• SMA connectors for external clock (differential)
• GTX clock port with two SMA connectors
1. http://www.xilinx.com/support/documentation and select ML605 Hardware User Guide
RTXSG User Guide
9