Download AD149 - Zeigermann
Transcript
HIROSE connectors (10) (13) are provided for single-cable connection to the mixer. (10) & (11) and (12) & (13) can be used simultaneously. (10) carries the balanced L-R output and the unbalanced L-R return (stereo-return 1). (13) carries the balanced AUX 1 and AUX 2 outputs and the unbalanced AUX return (stereo-return 2). Pin 1 2 3 4 5 6 7 8 9 10 L-R Left + Left Right + Right Ret 1 R Shield Ret 1 L Shield Shield Shield AUX Aux 1 + Aux 1 Aux 2 + Aux 2 Ret 2 R Shield Ret 2 L Shield Shield Shield Signal Signal Signal Signal Signal Signal (11) carries an unbalanced L-R output and unbalanced stereo-return 1 - for connection to a camera or DAT recorder. (12) carries unbalanced auxiliary outputs and unbalanced stereo-return 2 for connection to a camera or DAT recorder. Pin 1 2 3 4 5 6 L-R Left Right Shield Ret 1 L Ret 1 R Shield AUX Aux 1 Aux 2 Shield Ret 2 L Ret 2 R Shield Signal Signal Signal Signal POWER OUT (18) is a 4-pin HIROSE connector to supply 12V DC @ 100mA to power external equipment, eg two non-diversity radio microphones. Pin 1 2 3 4 Power ground Power ground DC +12V DC +12V Switched Unswitched Pin 3 depends on the position of the mixer ON/OFF switch. Connector (18) may also be used for powering two or three PORT-A-FLEX units. Each unit has an ‘in’ and an ‘out’ power socket so that several units can be daisy-chained. Typical usage could be FLEX-EQ, a headphone distribution amplifier 35