Download SYSMAC LINK Support Boards for PCI Bus Installation Guide

Installing FinsGateway Version 3 (PCI-SLK)
Section
3-3
3. The mounted Boards will be displayed in the SYSMAC LINK (PCI) Lists Dialog Box. Select the Board to be changed, and click the Change Button.
If the Board is not displayed in the dialog box, click the Refresh Button. The example window shows the Board ID has been set to 0. If multiple Boards are
mounted, all the mounted boards will be displayed in the dialog box. Select the
ID for the Board to be set.
4. The SYSMAC LINK (PCI) Properties Dialog Box will be displayed. Click the
Driver Tab, and make the driver settings.
26