Download User Manual

User Manual
- The Max var angle is maximum variation of the tool angle along one path from tail to nose. If this angle is
set to 0, the tool will keep a constant tilt from tail to nose, the tilt changing between each line.
- The Arm length is the length of the arm between the center of rotation to the tip of the tool.
- The Ref. A angle is the angle A written in the exported cutting files when the tool is vertical. The sign of
the angle can be inverted.
- The Ref. B angle (for 5 axis only) is the angle B written in the exported cutting files when the arm is in
the Oyz plan (the slices plan). The sign of the angle can be inverted.
Disk
- The Diameter D is the total diameter of the disk.
- The Thickness e is the thickness of the disk.
- The Corner radius r is the radius of the edge of the disk (0 if squared, e/2 if rounded).
- W is the width of the motor.
- e1 is the thickness of the motor toward the tail.
106