Download "user manual"

9
Maximum Sessions
The maximum number of sessions over this mode. The default equals Min
Contention Winners + Min Contention Losers.
This parameter is available only if both parallel sessions and CNOS are
supported for the partner LU. For more information, refer to Parallel Sessions
Supported? and CNOS Supported?.
Auto-init Session Limits?
Indicates whether session limits are established through CNOS processing
prior to session establishment. Check the box to specify that the first request
for a session over this mode initiates CNOS processing over the SNASVCMG
mode. If no SNASVCMG mode is active, one is brought up and session limits
are initialized. Clear the box to specify that session limits are not automatically
established.
This parameter is available only if both parallel sessions and CNOS are
supported for the partner LU. For more information, refer to Parallel Sessions
Supported? and CNOS Supported?.
Note – Auto-initialization is useful with CICS implementations that experience
CICS restarts or host failures.
Sessions to Auto Start
The number of contention-winner sessions that the local LU attempts to
activate for this session mode when the session limits increase because of
CNOS processing. The value can range from 0 to 127.
If you use this parameter in conjunction with the Auto-init Session Limits
parameter, you can initialize session limits prior to session activation.
Limited Resource Timeout
The time interval (in seconds) after which a “limited resource” session is
unbound if it is not used.
Session Restarted
The resource responsible for reinitializing a single session after a session
outage. The value can be Operator, PLU (primary LU), SLU (secondary LU),
PLU or SLU.
This parameter is valid only if neither parallel sessions nor CNOS are
supported for the partner LU. For more information, refer to Parallel Sessions
Supported? and CNOS Supported?.
Configuring for LUType 6.2
9-11