Download "user manual"

3
5. In the Type field, select the platform on which the server will run. Make
sure that you select the appropriate platform. Do not use the default
setting (Generic).
6. Typically, you can leave the default settings for the remaining parameters
in the Basic and Advanced dialog boxes. If you want to change any of the
other parameters, refer to Chapter 4, “Configuring Systems."
7. Click OK to add the system to the configuration.
3.4.3 Adding a PU2.1 Server
▼ To add a PU2.1 server to run on the system:
1. Double-click Systems in the resource tree to display the name of the
system you just added.
2. Double-click the system name to open its subordinate entries.
3. Click PU2.1 Servers in the resource tree to open a new resource table.
4. From the main window, select Edit → New → PU2.1 Server to display the
Create PU2.1 Server dialog box.
5. In the Name field, enter the name for the new PU2.1 server. The name can
contain up to eight alphanumeric characters (including @, #, and $). Tabs
and spaces are not allowed. The first character cannot be a number. The
name cannot be the same as any other PU2.1 server name.
3-6
SunLink SNA 9.1 PU2.1 Server Configuration Guide—August 1997