1
Download IMMUNITY SUITE
Transcript
The Generator window shows the level (in dBm) entered by the generator, at a given frequency (in MHz), to generate the voltage required. The color of the dot corresponds to the color of the line on the graph. The voltage applied will be shown in the Power Meter window. Values outside the selected tolerance will be shown in red; the generator will adjust the level to bring the voltage back into range. The color of the dot corresponds to the color of the line on the graph. During the work session, the generator level and voltage within the frequency range selected will be shown as a graph. Wait for the calibration to finish. The Status window shows each operation performed by the program during the calibration phase. Press the Exit button to leave Conducted mode (the button is deactivated during the calibration phase). Automotive 5-13
