Download Pressure Fit System

Supporting Post Disassembly Instructions
Step 7a:
Push the lever up to engage with magnet.
Step 7c:
Make sure the bottom pin touches the
plastic cover.
Step 7b:
Push in and hold the ratchet while pushing
the top section of post down.
Step 7d:
Bring back the lever to vertical position.
Step 9:
Take off top and bottom Foot.
Store the components in a safe place.
Step 8:
Bring back the level and safety lock to
original position.
Pressure Fit System - User Guide
Repeat steps 3 to 9 for the other
Post disassembly .
Rev: 11/04/09
Page: 21