Download LF User Manual

LF(R) Series Operation Manual
2 Basic Operation
2 Basic Operation
2-1 Powering On/Off and Operation
Check
Turning the balance ON/OFF
1
Check that the AC adapter is connected to the
balance.
When the AC adapter is plugged in, the balance
enters the standby state and an asterisk “*”
appears.
Leave the balance powered on with the
asterisk “*” displayed for 5 hours before
starting measurement. If you unplug the AC
adapter, you need to wait for 5 hours from
the time you plug it in again.
Turn the balance ON.
Standby state
Press the [On/Off] key.
The display shows all symbols and then changes to the
zero display.
2
Check that it is operating.
Push the weighing pan with your finger to check that the
readout changes.
Also check that the readout changes to zero
when you stop pushing.
3
Turn the balance OFF.
Press the [On/Off] key again.
The balance enters the standby state.
Standby state
- 15 -