Download User Manual

XPR16H - User Manual
4.7 User management configuration


Step 1: Go to Main Menu > Setup > Users (refer to Fig 4-39)
Step 1: To add a new user to the system click “ Add” button and a new window will pop-up (refer to Fig 4-40), which will
bring up 2 sub-menus: “General” and “Authority”
Fig 4-39
Fig 4-40
Setting up General:
o
o
o
Step 1: The user can input a suitable “User Name”, “Password” and also select a “User Type” (i.e. Normal or
Advanced)
Step 2: By selecting the check-box “Binding PC MAC Address” the new user can be limited to access the DVR from a
specific address only. The “PC MAC Address” can then be added in the corresponding field below.
Note: If the “PC MAC Address” is set as the default “00-00-00-00-00-00”, the user is not bound to a specified
computer.
Click “OK” to save any changes
60