Download 2 - Schneider Electric

Specifications (continued)
Safety automation system solutions
0
Preventa configurable safety controllers
type XPSMC
™
Communication
Modbus™ serial link
Compatibility
Serial link ports
XPSMC16Z, XPSMC32Z,
XPSMC16ZC, XPSMC32ZC,
XPSMC16ZP, XPSMC32ZP
1 x RJ45
Slave
Number and type
Status
Data exchange
Addressing
Baud rate
Parity
Fixed parameters
bps
Functions supported
CANopen bus
Compatibility
Serial link ports
Number and type
Status
Data exchange
Parameters
(adjustable using software
XPSMCWIN)
Profibus bus
Compatibility
Serial link ports
Baud rate
Kbps
Mbps
Address
Number and type
Status
Data exchange
Parameters
Baud rate
Address
Mbps
2
14 words
1 …247
1200, 2400, 4800, 9600 or 19200
Even, odd, none
RTU (Remote Terminal Unit) mode
1 start bit / 8 data bits
1 stop bit stop with “even” or “odd” parity
2 stop bits without parity
01: 8-bit output data / 32-bit input data (0 = OFF, 1 = ON)
02: 32-bit input data / 8-bit output data (0 = OFF, 1 = ON)
03: information and errors
XPSMC16ZC, XPSMC32ZC
1 x SUB-D 9-pin male
Slave
14 words
By included dual port memory: only data addresses, diagnostics, but no baud rates
20, 50, 125, 250, 500, 800
1
1…127
XPSMC16ZP, XPSMC32ZP
1 x SUB-D 9-pin female
Slave
14 words
By included dual port memory: only data addresses
12
1…125
Connections
Type
Separate plug-in screw connector
XPSMCTSpp (1)
Power supply and relay output terminals
1 conductor Without cable end
With cable end
Separate plug-in spring clip connector
XPSMCTSpp (1)
Solid or flexible cable: 24-12 AWG (0.2…2.5 mm²)
Without bezel, flexible cable: 22-12 AWG (0.25…2.5 mm²)
With bezel, flexible cable: 22-12 AWG (0.25…2.5 mm²)
Tightening torque of screw terminals
Solid or flexible cable: 24-16 AWG
(0.2…1.5 mm²)
Without bezel, flexible cable: 22-16 AWG
(0.25…1.5 mm²)
Double, with bezel, flexible cable:
20-16 AWG (0.5…1.5 mm²)
4.2...5.3 lb-in (0.5...0.6 Nm)
Wire stripping length
0.39 in (10 mm)
1 conductor
Without cable end
Solid or flexible cable: 28-16 AWG (0.14…1.5 mm²)
With cable end
Without bezel, flexible cable: 23-16 AWG (0.25…1.5 mm²)
2 conductors Without cable end
With cable end
–
–
Double, with bezel, flexible cable:
20-18 AWG (0.5…1.0 mm²)
–
Other terminals
With bezel, flexible cable: 23-20 AWG (0.25…0.5 mm²)
2 conductors Without cable end
With cable end
Enclosure mounting (conforming to DIN EN 50022)
(1)To be ordered separately.
Solid cable: 28-20 AWG (0.14…0.5 mm²)
Flexible cable: 28-19 AWG
(0.14…0.75 mm²)
–
Without bezel, flexible cable: 23-22 AWG –
(0.25…0.34 mm²)
Double, with bezel, flexible cable: 20 AWG –
(0.5 mm²)
Metal adaptor for mounting on DIN 35 mm metal rail
2/127